 |
ShockWave
(8310)
ShockWave
is a concentrated, EPA-registered, quaternary ammonium chloride
cleaner, that disinfects hard, nonporous surfaces, and also sanitizes
porous and semi-porous surfaces subject to microbial contamination.
ShockWave is available in 1-gallon jugs and convenient 10-ounce
bottles, the proper amount for five gallons of usable product.
|
 |
AfterShock
(8390)
AfterShock
is an EPA-registered fungicidal coating designed to kill residual
mold growth after pre-cleaning contaminated surfaces. AfterShock
is a durable, 100% acrylic white coating that can be applied to
commong building materials including wood, OSB, drywall, concrete,
and metal surfaces.
|
 |
IAQ 2000 (8320)
After cleaning infested surfaces of all visible mold, treat with
Fiberlock IAQ 2000 concentrated fungicide/disinfectant to kill
any mold remaining on affected surfaces.
|
 |
IAQ 2500 (8325)
If
desired, use IAQ 2500, the premixed version of our fungicide/disinfectant.
Eliminates the need to dilute on-site, as well as improper dilution.
|
 |
| IAQ 3000
(8330) |
For porous masonry surfaces,
apply a coat of Fiberlock IAQ 3000 acrylic block filler
to provide a smooth surface for the mold resistant coating. |
| |
|
 |
| IAQ 4000
(8340) |
On metal surfaces, a coat
of Fiberlock IAQ 4000 acrylic DTM primer will prevent rust
stains from migrating through to the finished surface. |
| |
|
 |
| IAQ 5000
(8350) |
| On bare wood, apply a
coat of Fiberlock IAQ 5000 acrylic stain-blocking primer
to seal the wood and to prevent wood stains from migrating
through the coating system. |
| |
|
 |
| IAQ 6000
(8360) |
| After disinfecting the surface,
apply a coat of Fiberlock IAQ 6000 mold-resistant coating
to prevent mold from reappearing on the coating surface. Fiberlock
IAQ 6000 contains dual EPA-registered fungicides that will
prevent mold from growing on the surface of the cured coating
film. |
| |
|
 |
| IAQ 6000HD
(8362) |
| IAQ 6000HD is a heavy-duty,
high viscosity, high build version of IAQ 6000 that will bridge
porous building materials. Fiberlock IAQ 6000HD contains dual
EPA-registered fungicides that will prevent mold from growing
on the surface of the cured coating film. |
| |
|
 |
| IAQ 6100
(8361) |
| IAQ 6100 is a clear version
of IAQ 6000 that will allow for post-remediation visual inspection
of treated surfaces. IAQ 6100 applies white for easy application
then dries to a clear finish. IAQ 6100 contains dual EPA-registered
fungicides that will prevent mold from growing on the surface
of the cured film. |
| |
|
 |
| IAQ 6500
(8365) |
| IAQ 6500 is a black version
of IAQ 6000 to be used in areas where a bright white finish
may be undesirable, such as attics, crawl spaces, etc. IAQ
6500 contains dual EPA-registered fungicides that will prevent
mold from growing on the surface of the cured film. |
| |
|
 |
| IAQ 6040
(8363) |
| IAQ 6040 is a low-viscosity,
translucent violet sealant designed to seal new construction
materials and resist fungal growth. IAQ 6040 contains dual
EPA-registered antimicrobials that inhibit the growth of mold
on the surface of the cured film. |
| |
|
 |
| IAQ 7000 (8370) |
| If bare metal duct needs
to be sealed, use Fiberlock IAQ 7000, a low viscosity coating
designed to lock down particulate left on surfaces after
cleaning. Fiberlock IAQ 7000 contains an EPA-registered
fungicide to prevent mold growth on the surface of the coating.
Also available in clear: Fiberlock IAQ 7500 (8375). |
| |
|
 |
| IAQ 8000 (8380) |
| For HVAC duct remediation
projects, apply Fiberlock IAQ 8000 to seal and resurface
cleaned insulation. Fiberlock IAQ 8000 will help strengthen
existing insulation material, and also contains an EPA-registered
fungicide to prevent mold from growing on the surface of
the coating. Also available in black: Fiberlock IAQ 8500
(8385). |
| |
|
 |
| IAQ 9000 (8395) |
| Fiberlock IAQ 9000 is a
low-odor waterproofing coating that is specially formulated
to stop water from penetrating through a variety of interior
and exterior surfaces. This latex based formula stops 10
psi of water pressure and reduces radon gas penetration.
Fiberlock IAQ 9000 contains an EPA-registered fungicide
to help prevent mold from growing on the surface of the
cured film. |
| |
|
